Do you want to know how to get blood out of the carpet quickly? Remember that the quicker you act, the easier it will be. When blood stains are allowed to set in and dry on a carpet, it will be tough for you to remove them. Dried blood stains are difficult to remove from carpets, but it is possible.
How to get blood out of carpet? To get blood stains out of your carpet, follow these three steps:
- Mix ½ cup of warm water with 2 tablespoons of ammonia (or liquid dish soap).
- Pour some of this solution on a sponge or a clean cloth and then use the sponge or cloth to blot out the stain on the carpet.
- Get another sponge or cloth and dip it in cold water. Rub this wet sponge or cloth on the stain until the blood stains come out.
These steps may or may not work depending on how bad the blood stain is. In this article, I’ll give other solutions and the materials you’ll need to ensure your carpet is cleaned.
Also, to make cleaning your carpet a breeze, take a look at the BISSELL Little Green ProHeat Portable Carpet and Upholstery Cleaner. This cleaner is a compact, multipurpose wet vacuum that can easily get blood and other stains out of your carpet:
Click here to see this cleaner on Amazon.
How to Get Blood Out of Carpet
The simplest way to clean blood out of the carpet is by mixing about 2 tablespoons of ammonia with ½ cup of warm water. Scale up the amounts as required for larger stains. Put some of this solution on a sponge or clean cloth and then apply it directly to the blood stain on the carpet. Do this repeatedly until the carpet absorbs the solution. Then use another sponge dipped in cold water to blot the carpet dry.
You can also mix two cups of cold water with one tablespoon of liquid dish soap that is scent-free. Dip a clean cloth or sponge to this solution and use it to blot the blood stain. Repeat the process until the mixture is absorbed in the carpet. Next, get another sponge. Dip it in cold water and blot dry the spot.
If that spot turns brown after it dries, apply a solution consisting of two cups of warm water and one cup of vinegar. Use a sponge to apply the solution and blot dry that spot. If there are still some brown traces on the spot, you need to use a more aggressive approach. You need the help of a portable carpet cleaning machine.
The BISSELL Little Green ProHeat Portable Carpet and Upholstery Cleaner is just the right tool for this job. It is a compact, multipurpose wet vacuum that can deep clean your carpet.
Click here to see this cleaner on Amazon.
With a built-in water heater, it can provide a powerful spray and suction clean that will dry your carpet in one step. There will be no blood stains remaining on your carpet after using this machine.
Cleaning Agents That Can Remove Blood Stains on Carpet
A variety of household products exist that you can use to remove blood stains from carpets. Some of these household items include the following:
1. Baking Soda
Turn baking soda into a paste and apply it to the blood stain. Allow the paste to sit there for up to one hour to lift the stain from the fabric. Since baking soda is also a whitening agent, it can erase the color of blood on the carpet.
2. Toothpaste
Apply some amount of toothpaste directly onto the blood stain. Allow it to dry for several minutes. Once the toothpaste has dried, rinse it off with cold water. Dry the spot with a sponge or white clean cloth afterward.
3. Vinegar
The trick is to pour vinegar as soon as you see blood stains on the carpet. Using vinegar to remove dried blood on the carpet is very difficult. Let the vinegar soak the spot for 5-10 minutes before blotting the stains out with a damp cloth.
4. Hydrogen Peroxide
Wet the stained spot with hydrogen peroxide. Leave it there for about an hour. Blot the blood-stained spot with a dry sponge or clean cloth until the stains are gone. Repeat the process as long as there is a blood stain on the carpet.
5. Water and Ammonia
Mix one glass of water with two tablespoons of ammonia. Pour this solution into a spray bottle. Spray the solution to the stained spot and let it soak into the carpet for 5 minutes. Get a sponge or clean cloth and blot dry that spot. But don’t use this solution on woolen carpets because it can damage the fabric.
6. OxiClean
If the blood has already dried, you can use OxiClean Versatile Stain Remover. It is chlorine-free and won’t bleach your carpet. For tougher blood stains, use the OxiClean MaxForce.
7. Salt
If you don’t have anything but salt, you can turn it into a thin paste to remove blood stains on your carpet. In a bowl, mix cold water and some salt to make a thin paste. Apply the paste directly to the stain. Let it stay there for 5 minutes. Blot the stain by using a sponge or a clean cloth until the stain is gone.
8. Water and Liquid Dish Soap
Stains left by dried blood can be removed by a solution of cold water and liquid dish soap. Get a clean cloth or a clean sponge and dip it into the solution.
Apply the cloth or sponge directly onto the stain until the carpet absorbs all the solution. Gently scrub the spot with a soft toothbrush and then rinse it with a clean wet cloth. Blot the spot dry with a sponge.
See the below video for other ways to get blood out of your carpet:
Practical Steps in Getting Blood out of Carpet
When answering the question “how to get blood stains out of carpet?” we must look at the method for cleaning fresh blood stains vs dried blood stains from the carpet. There are two kinds of blood stains on carpets: fresh blood stains and dried blood stains. Each of these stains requires a different method of stain removal.
1. Fresh Blood Stain Removal
Step 1: Blot the Stain Using a Clean White Cloth
Press the cloth down and try to lift as much fresh blood stain as you can get. For larger stains, start on the outer edges of the stain and work your way inside to prevent further staining in the surrounding areas. Don’t rub the stain.
Step 2: Spray the Spot with Cold Water
Pour cold water into a spray bottle and spray it on the stain. Allow it to stay there for a couple of minutes. Don’t use hot or warm water. Hot temperatures can permanently set the stain on the carpet. Spray only a reasonable amount of water. Oversoaking the spot will also spread out the stain.
Step 3: Continue Wetting and Blotting
To absorb the moisture, blot the spot with a dry cloth or towel. A white towel is better because you can see the stains as they are absorbed. Do it in upward and downward motions. You may have to repeat the process of wetting and blotting until the stain is removed.
Step 4: Use Salt Paste for Stubborn Stains
For stubborn stains, make a salt paste out of salt and cold water. Apply the paste onto the stain. Keep the paste on the spot for a couple of minutes. Blot the spot with a towel or cloth. Repeat the process as long as there is still a stain. Vacuum the spot when it is already dry. Don’t let any salt residue remain because it can damage the carpet.
Step 5: Use Diluted Liquid Detergent
Another alternative is to mix one cup of cold water with one to two tablespoons of liquid dish soap that has no bleach. Soak a clean cloth to the solution. Apply the cloth to the stained spot. Spray the spot with plain water to rinse the detergent and blot dry with a clean cloth or towel.
Step 6: Dry the Spot Faster with an Electric Fan
Speed up drying time by blowing an electric fan on the wet spot.
Step 7: Vacuum Dry
To restore the original state of the carpet, use a vacuum.
To deep clean your carpet with ease, take a look at the BISSELL SpotClean ProHeat Portable Spot and Stain Carpet Cleaner.
Click here to see it on Amazon.
It is a deep-reach cleaning tool that can remove tough stains and embedded dirt from the bottom up. It also has removable tanks for easy filling and emptying.
2. Dried Blood Stain Removal
How to get blood stain out of carpet that has dried and hardened in the carpet? Removing dried blood is a tougher job since the stain has already embedded itself onto the fabric of the carpet. How to get dried blood out of carpet will require tougher measures as well as stronger substances. But it still can be done so don’t worry.
Step 1: Try It First on a Discreet Area of the Carpet
Removing dried blood stains is a tough job that needs tough procedures. So, you should first try this method on an insignificant spot on the carpet. If it does not destroy the carpet, you can proceed. Wait for 15 minutes after you have gone through the whole process. The treated section should be dry. You can also check if there is any damage done.
Step 2: Use a Scraper
Get a dull butter knife and scrape it across the stained blood spot to get rid of the specks of dried blood. You should forego this process if your carpet is delicate and expensive.
Step 3: Apply Meat Tenderizer
Get some amount of meat tenderizer, preferably with no flavor, and mix it with cold water. The ratio should be 1:1. You can use a meat tenderizer because it has some chemicals that can break down the proteins in the dried blood stain.
Dab the mixture onto the blood stain. Let the mixture sit and soak on the stain for about 15 to 30 minutes. Blot the spot with a clean towel, and then rinse off any residue with a mixture of cold water and liquid dish soap.
Step 4: Use Hydrogen Peroxide
Another way is to moisten the tuffs of the spot with 3% hydrogen peroxide. This chemical will lighten the blood stain. Allow the spot to dry in a lighted room. The solution will break down the stain with no need for rinsing.
While this method is a bit risky, it is safer than bleaching your carpet to remove dried blood stains. However, don’t use more than 3% hydrogen peroxide. Stronger solutions will lighten the color of your carpet.
Step 5: Shampoo and Then Use Ammonia
Another alternative method is to mix two teaspoons of shampoo or liquid dish soap with a cup of water. Pour the shampoo and ammonia solution into a spray bottle and spray it over the dried stain. Next, mix one tablespoon of ammonia with one cup of water. Use caution around ammonia to ensure that you don’t inhale the ammonia fumes.
Blot dry the shampoo, and then spray the ammonia on the spot. Let it remain there for five minutes. Blot dry again. Then, spray water on the spot, blot dry, and rinse.
Step 6: Use an Enzyme Cleaner
A third alternative is to use an enzyme cleaner. The chemical ingredients in commercial enzyme cleaners can break down the chemicals present in dried blood stains.
Spray the enzyme cleaner on the stain, as per instructions on the bottle. Let the chemical sit there for a couple of minutes and blot the spot dry. Don’t use this cleaner on woolen and silk carpets.
Step 7: Dry the Carpet in a Well-ventilated Area
Use an electric fan to blow air to the cleaned spot. An electric fan will help speed up the drying time and will reduce the risks of having small particles left on the carpet backing.
To restore your carpet to its original state and make cleaning even easier, you can use the Hoover Smartwash Automatic Carpet Cleaner. It’s a carpet cleaner with automatic cleaning technology, such as auto-clean motion-sensing design, auto-mix, and auto-dry capabilities. It will make your dried blood stain removal quite easy.
Conclusion – How to Clean Blood Out of Carpet
So, to revisit our initial question: How to get blood out of carpet? Or how to clean blood from carpet? If you want to get blood stains out of your carpet, mix ½ cup of warm water with about 2 tablespoons of ammonia. Get a sponge or clean cloth and soak it into this solution. Use the sponge or cloth to blot out the stain on the carpet.
Continue blotting out the stain until it fully absorbs the solution in the sponge or cloth. Next, get a clean sponge and dip it in cold water. Apply this sponge directly on the stain and blot the spot dry.
The list of 8 cleaning agents that you could use to get the blood out of your carpet are as follows:
- Baking Soda
- Toothpaste
- Vinegar
- Hydrogen Peroxide
- Water and Ammonia
- OxiClean
- Salt
- Water and Liquid Dish Soap
Blood stains can be as frustrating as wine stains, but they will come out by following the advice in this article.
Related reading:
How to Clean Dried Cat Urine from Carpet? 6 Steps
How to Clean a Carpet – 5 Simple Steps
